Dlaczego niektóre wtyczki sieciowe mają pokrywy i niektóre są nagie?

Spisu treści:

Wideo: Dlaczego niektóre wtyczki sieciowe mają pokrywy i niektóre są nagie?

Wideo: Dlaczego niektóre wtyczki sieciowe mają pokrywy i niektóre są nagie?
Wideo: IGN Holiday Gift Guide 2013: Gadget Geek Gift Ideas 2024, Marsz
Dlaczego niektóre wtyczki sieciowe mają pokrywy i niektóre są nagie?
Dlaczego niektóre wtyczki sieciowe mają pokrywy i niektóre są nagie?
Anonim
Trzymaj się wystarczająco długo w biurze, a zobaczysz wyraźny trend w okablowaniu sieci. Niektóre kable mają zakrytą wtyczkę, a niektóre kable są nagie. Jaki jest cel małej osłony wtyczki?
Trzymaj się wystarczająco długo w biurze, a zobaczysz wyraźny trend w okablowaniu sieci. Niektóre kable mają zakrytą wtyczkę, a niektóre kable są nagie. Jaki jest cel małej osłony wtyczki?

Dzisiejsza sesja pytań i odpowiedzi przychodzi do nas dzięki uprzejmości SuperUser - poddziałowi Stack Exchange, społecznościowej grupy witryn z pytaniami i odpowiedziami.

Pytanie

Czytnik SuperUser Michael Kj√∂rling chce wiedzieć:

Some RJ45 plugs have an exposed lock release clip, like this:

However, others place the release clip under a rubber cover, like this:
However, others place the release clip under a rubber cover, like this:
I find that the rubber cover is almost never anything but a nuisance.
I find that the rubber cover is almost never anything but a nuisance.
  • Does it actually have a function besides being annoying?
  • Can I take a suitable tool and simply cut it off without affecting the cable’s function?

Przyjmowanie ręcznych narzędzi do ubogiej gumowej okładki wydaje się nieco ekstremalne. Czy Michael powinien opuścić pokrywy?

Odpowiedź

Pomocnik SuperUser Journeyman Geek oferuje pewien wgląd:

From experience, those retention clips break off a lot on the first sort of cables – those are fine for cables that are well protected and/or going to be plugged in and forgotten, but the moment those clips bend the wrong way, they break, and you end up with a cable that dosen’t clip in place. They also snag each other sometimes and are just a PITA.

Cable boots (yes thats the proper name for them) keep cables from snagging, those clips from breaking, and generally ensure the cable dies from other things, like rabbit attacks, pruning shear accidents, and backhoe incidents. On the other hand, those cables are not slipping out from their sockets cause a tiny bit of plastic broke, and thats whats important.

Feel free to remove them, or get cables without them, but I personally find them pretty useful (and cables with them tend to be better made in many cases). They have no major structural or electrical purpose.

Inny użytkownik, oKtoSite, poddaje kolejny wotum zaufania dla użyteczności dodatku do kabla:

When retracting a RJ45 plug through narrow tubing or around corners, the clip tends to snap off, effectively making the network cable useless in most environments. The rubber dome (most commonly referred to as a cable boot) nearly always prevents that from happening.

You wouldn’t know how many network cables I’ve seen with broken off clips.

Po tym, jak wyciągnęliśmy naszą sprawiedliwą część kabli, dobrze się z tymi dwoma: buty są użyteczne i, chyba że masz nieodparty powód, aby zrobić inaczej, powinieneś je zostawić.

Czy masz coś do dodania do wyjaśnienia? Dźwięk w komentarzach. Chcesz przeczytać więcej odpowiedzi od innych użytkowników Stack Exchange, którzy znają się na technologii? Sprawdź cały wątek dyskusji tutaj.

Zalecana: